Printer Downloads
49a Toner Refill
http://www.megaupload.com/?d=H6SUG6L2
File name: Toner 49A refill (WWW.refillingtoner.blogspot.c..mp4
File description: TONER 49A REFILLING
File size: 27.33 MB
HPTC-Printer Config
http://www.megaupload.com/?d=SYHGFT3I
File name: HPTC-Printer Config.pdf
File description: HP THIN CLIENT - Printer Configuration
File size: 178.22 KB
ML-2245spl2
http://www.megaupload.com/?d=773K4O6L
File name: ML-2245spl2.ppd
File description: ML2245 PPD FOR DMP PRINTER
File size: 25.27 KB
Samsung Resetter
http://www.megaupload.com/?d=VAF1FCDN
File name: Samsung Resetter NEW(WWW.PRINTERFILES.BLOGSPOT...rar
File description: SAMSUNG ML2245 RESETTER
File size: 946.66 KB
hp 1020 refill
http://www.megaupload.com/?d=1I3ORIKX
File name: hp 1020 refill (WWW.refillingtoner.blogspot.com..mp4
File description: hp 1020 refill (WWW.refillingtoner.blogspot.com)
File size: 13.5 MB
HP 12A Toner Refilling
http://www.megaupload.com/?d=56B9WK48
File name: HP 12A Toner Refilling(WWW.refillingtoner.blogs..mp4
File description: HP 12A Toner Refilling
File size: 23.78 MB
Samsung ML 1610
http://www.megaupload.com/?d=529EJ730
File name: Samsung ML 1610 - (www.printerfiles.blogspot.co..mp4
File description: ml1610
File size: 24.48 MB
Monday, October 31, 2011
Printer Downloads
49a Toner Refill
http://www.megaupload.com/?d=H6SUG6L2
File name: Toner 49A refill (WWW.refillingtoner.blogspot.c..mp4
File description: TONER 49A REFILLING
File size: 27.33 MB
HPTC-Printer Config
http://www.megaupload.com/?d=SYHGFT3I
File name: HPTC-Printer Config.pdf
File description: HP THIN CLIENT - Printer Configuration
File size: 178.22 KB
ML-2245spl2
http://www.megaupload.com/?d=773K4O6L
File name: ML-2245spl2.ppd
File description: ML2245 PPD FOR DMP PRINTER
File size: 25.27 KB
Samsung Resetter
http://www.megaupload.com/?d=VAF1FCDN
File name: Samsung Resetter NEW(WWW.PRINTERFILES.BLOGSPOT...rar
File description: SAMSUNG ML2245 RESETTER
File size: 946.66 KB
49a Toner Refill
http://www.megaupload.com/?d=H6SUG6L2
File name: Toner 49A refill (WWW.refillingtoner.blogspot.c..mp4
File description: TONER 49A REFILLING
File size: 27.33 MB
HPTC-Printer Config
http://www.megaupload.com/?d=SYHGFT3I
File name: HPTC-Printer Config.pdf
File description: HP THIN CLIENT - Printer Configuration
File size: 178.22 KB
ML-2245spl2
http://www.megaupload.com/?d=773K4O6L
File name: ML-2245spl2.ppd
File description: ML2245 PPD FOR DMP PRINTER
File size: 25.27 KB
Samsung Resetter
http://www.megaupload.com/?d=VAF1FCDN
File name: Samsung Resetter NEW(WWW.PRINTERFILES.BLOGSPOT...rar
File description: SAMSUNG ML2245 RESETTER
File size: 946.66 KB
p1566 resetter
Cold reset
A cold reset sets most, but not all, default variables stored in NVRAM back to factory default
values. It typically does not reset the page count, paper tray sizes, localization language, or
formatter number.
To perform a cold reset
1 Turn the printer off.
2 Press and hold down the GO button.
3 Turn the printer on and continue to hold the GO button.
4 After the Go, Attention, and Ready lights turn on, continue holding the GO button for
approximately five seconds, but not longer than fifteen seconds. During this process, the
Attention light will turn off.
5 Release the GO button.
Note If either the Go or Ready light turned off or no lights turned off before the GO button was released,
then repeat steps 1 through 5.
6 The printer lightss begin cycling from front to back. The cold-reset process runs until the
printer is in the Ready state.
NVRAM initializer
NVRAM initializer sets all default variables stored in NVRAM back to factory default values or to
a default ROM value, depending on the variable. It also performs a system reset.
NVRAM initializer resets the following:
all menu settings to factory default values
factory settings such as formatter number, page counts, factory paper settings
To perform an NVRAM initialization
1 Turn the printer off.
2 Press and hold the GO button.
3 Turn the printer on and continue to hold the GO button.
4 After the Go, Ready, and Attention lights turn on, continue holding for at least 20 seconds.
During this process, the Attention, Ready, and Go lights will each turn off.
5 Release the GO button.
6 The device lights will begin cycling from front to back. The NVRAM-initialization process runs
until the printer is in the Ready state.
Note This process is similar to a continuous self-test. For more information, see “Performing a
continuous self-test“ .
After the initialization is complete, you can use PJL commands (see “Using PJL commands” ) to restore some of your printer settings
Cold reset
A cold reset sets most, but not all, default variables stored in NVRAM back to factory default
values. It typically does not reset the page count, paper tray sizes, localization language, or
formatter number.
To perform a cold reset
1 Turn the printer off.
2 Press and hold down the GO button.
3 Turn the printer on and continue to hold the GO button.
4 After the Go, Attention, and Ready lights turn on, continue holding the GO button for
approximately five seconds, but not longer than fifteen seconds. During this process, the
Attention light will turn off.
5 Release the GO button.
Note If either the Go or Ready light turned off or no lights turned off before the GO button was released,
then repeat steps 1 through 5.
6 The printer lightss begin cycling from front to back. The cold-reset process runs until the
printer is in the Ready state.
NVRAM initializer
NVRAM initializer sets all default variables stored in NVRAM back to factory default values or to
a default ROM value, depending on the variable. It also performs a system reset.
NVRAM initializer resets the following:
all menu settings to factory default values
factory settings such as formatter number, page counts, factory paper settings
To perform an NVRAM initialization
1 Turn the printer off.
2 Press and hold the GO button.
3 Turn the printer on and continue to hold the GO button.
4 After the Go, Ready, and Attention lights turn on, continue holding for at least 20 seconds.
During this process, the Attention, Ready, and Go lights will each turn off.
5 Release the GO button.
6 The device lights will begin cycling from front to back. The NVRAM-initialization process runs
until the printer is in the Ready state.
Note This process is similar to a continuous self-test. For more information, see “Performing a
continuous self-test“ .
After the initialization is complete, you can use PJL commands (see “Using PJL commands” ) to restore some of your printer settings
Sunday, October 30, 2011
Printer files Downloads
Some Useful Websites and Downloads
hp color laserjet 1500, 1566, 1606
http://www.s-manuals.com/manuals/printer/hp/hp_color_laserjet_1500_service_manual.pdf -->page 221 cold reset
HP printers-resetter
http://tricks-collections.com/category/printers-resetter/hp-printers/
reset printer canon
models
-mp140
-mp160
-mp180
-mp210
-mp220
-mp460
-mp470
-mp500
-mp510
-mp530
-mp600
-mp610
-mp800
-mp820
-mp810
-mp830
-mp960
-mp970
http://tricks-collections.com/reset-printer-canon-mp140-mp160-mp180-mp210-mp220-mp460-mp470-mp500-mp510-mp530-mp600-mp610-mp800-mp820-mp810-mp830-mp960-mp970/
All printer resetters
http://tricks-collections.com/category/printers-resetter/
Printer Downloads
http://tricks-collections.com/download/
Printer Service Manuals
http://tricks-collections.com/service-manual/
Printer reset videos
http://www.printerreset.net/en/info/video
Some Useful Websites and Downloads
hp color laserjet 1500, 1566, 1606
http://www.s-manuals.com/
HP printers-resetter
http://tricks-collections.com/
reset printer canon
models
-mp140
-mp160
-mp180
-mp210
-mp220
-mp460
-mp470
-mp500
-mp510
-mp530
-mp600
-mp610
-mp800
-mp820
-mp810
-mp830
-mp960
-mp970
http://tricks-collections.com/
All printer resetters
http://tricks-collections.com/
Printer Downloads
http://tricks-collections.com/
Printer Service Manuals
http://tricks-collections.com/
Printer reset videos
http://www.printerreset.net/
Subscribe to:
Posts (Atom)